• about
  • contact
linear lighting
led strip white
‌
thin - good for soft outlining and ambient lighting

thin - good for soft outlining and ambient lighting

4mm
‌
standard model- general task lighting applications

standard model- general task lighting applications

8mm
‌
powerfull - general room illumination

powerfull - general room illumination

12mm

The white basic range covers most general lighting applications. There are three models with Low, medium and high light outputs.
A wide range of colour temperatures are available.

Suggestions

All the strips are 24V and have a higher than typical density of LEDs. This creates are more even light and lets us utilise a wider range of shallow profiles without the undesired “starring” effect The 4mm strip is useful for edge lighting, in tight spaces and even task lighting if near the working surface. See the mini-profiles for a range of profile installation options. The middle-power 8mm model

Custom super-warm 1800K LEDs are an option for these models to create a fire or candlelight like light quality.

Installation

For a professional installation, match with suggested suitable profiles. Total power must be calculated and an appropriate power supply chosen. As a rule-of-thumb, to be safe do not exceed 80% of the power supplies maximum power specification. Different power rated strip models can be connected to the same power supply as long as the total consumption is observed.

Physical

Protection

IP54 protection is minimum for all models. Plastic sheathing means that the strip can be easily wiped free of dust.

Adhesive peel-off 3M tape backing allows direct secure mounting inside profiles or upon other surfaces.

Lifetime

  • Designed with a resonable power consumption using efficient LEDs. The LEDs are not being pushed near their thermal limit.
  • This means more possibilities for installation - profile is not required for heat dissapation.
  • Also a long and reliable product life. 3-year warranty.

Packaging

Box with strip spool. All made from re-cyclable cardboard. Printed with bio-degradable ink.

Colour

Rendering

Ra95 notates a colour rendering index or CRI of 95. Colours in your environment will be reproduced faithfully.

SDCM<3 indicates the specified colour of the light that is selected for the strip will be accurate from LED to LED.

1800K models have SDCM<5 due to very warm colour

Selection

The basic white range have these standard colour temperature options
1800K, 2300K, 2700K, 3000K, 4000K
others from 1500K to 6000K available on request

Specifications

ALL White models

  • White 1800-4000K
  • 24V
  • IP54
  • 5m roll

axl.fs4.180w.6W

  • 4mm
  • 180 leds per metre
  • 6W

axl.fs8.180w.10W

  • 8mm
  • 180 leds per metre
  • 10W

axl.fs12.dr300w.14W

  • 12mm
  • 300 leds per metre
  • 14W

Download

  • axl.fs4.180w.6W 4mm white
  • axl.fs8.180w.10W 8mm white
  • axl.fs12.dr300w.14W 12mm white (double-row)

  • high-density
  • 4mm
  • 8mm
  • 2214led
  • 12mm
  • ip54
  • 5m-reel
  • 24V
  • 1-channel
  • 6W
  • 10W
  • 14W
axl.fs4.180w.6W
180 led/m
white
axl.fs8.180w.10W
180 led/m
white
axl.fs12.dr300w.14W
300 led/m
white

page contents

    • Suggestions
    • Installation
    • Physical
    • Colour
    • Specifications
    • Download

other linear

  • white mixing flex
  • colour mixing flex
  • waterproof flex
  • flat neon-flex
  • multi-channel control
© axxonic 2020  sister site artilluminate